The polypropylene BCF yarn is a new type of differential fiber suitable for developing a thick-thick decorative fabric. Our factory produces a polypropylene BCF silk fabric, with a full feel thick, thick appearance, and lustrous.

Process design of polypropylene BCF yarn products: polypropylene BCF fluffy, suitable for all masked decorative fabrics such as sand release, Simmons bed cover, car seat cushion.

The carpet made of polypropylene BCF yarn is extremely strong, anti-static, its hand feels like wool, and the elasticity is also excellent, not easy to start.

What are the reasons for polyparality of polypropylene BCF yarn?

The polypropylene BCF is widely used in carpet production. The color difference of filament is poorly leads to a large number of color differences such as carpets and the complaints of customers, thereby forming long-filament differences and other factors affecting sales. The color difference is generally referred to in the same batch of BCF filaments, production and use, which can be seen in the naked eye, and the difference between the sections, the cartridge and the cartridge, even the color change of the layer and the layer.

Quality of color masterbatch. Since the polypropylene itself cannot be stained, the spinning is appropriately added to the color masterbatch to produce a good yarn. However, the color difference caused by the quality of color masterbatch is not a small number. The color master is uneven, and there is a knife, and it will now cause color difference. The measure taken is that the case where the particularging machine is often checked, and the color masterbatch is produced to form a size uniform slice.

2. Temperature. The temperature of the polypropylene filament is also a major cause of impact color difference during spinning. Because the polypropylene itself has a high melting point, it is necessary to ensure that the spinning temperature is 60 ° higher than the polypropylene itself during the spinning process. However, since the spinning temperature is very sensitive to the color. This requires a doctor's craft staff to control the spinning temperature for colorless gauze of different colors.

3. Distance deformation. People will lead to color differences in "drafting deformation", and they are generally considered to be impossible. However, it is common from the customer to see this. The measure is to ensure that the oil, the selection and tension of the deformer, which will effectively control the chromatic aberration.

4. The effect of tensile temperature. Tropic temperature is very important. The temperature should be controlled in the glass transition temperature of 10 degrees - 20 degrees or more. The temperature is too high to dissolve cause the wire to break. The temperature is too low, which will cause the filament to do not disagree with the color. The research is certified, the tensile temperature is controlled in 130 °.